To see Old Glory waving in the wind always brings a sense of pride. If you’re considering adding a flagpole to your yard, a good choice is a telescoping pole with aluminum sections that slide up and down and snap in place.
A contractor will charge $960 to install a 25-foot pole in concrete, which includes the labor and material. You can buy a flagpole kit for $550 and install it yourself. The kit includes a 25-foot pole with installation sleeve and gold ball top, a 3-foot-by-5-foot flag and swivel rings and harness that allows the flag to fly freely. Another cost is $25 for concrete mix and gravel for its foundation.
To install a pole, dig a round hole approximately 28-inches deep by 12-inches round, and place 6-inches of small gravel for drainage in the bottom of the hole. Insert the bolt in the sleeve and fill in the area around it with concrete. Use a carpenter’s level to make sure it is level.
When choosing a flag pole you should know about the wind in your area. Really. The wind load or expected wind at an elevation of 30-feet above the ground is used to determine the appropriate size of a flag pole. Don’t worry you won’t have to figure it out because flag and flag pole retailers use a reference map – it’s the same one for highway and transportation signs.
To compare more improvement and repair job costs, visit us at www.diyornot.com.